User Manual Q&AAnswer
Jan 16, 2025 - 09:55 PM
To install and mount the LED Frame for Dampa, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by ensuring that you have all the necessary tools and materials for installation, including a hammer, screws, and a screwdriver.
2. Determine the desired location for the LED Frame. Make sure the surface is clean and free from any dust or debris.
3. Position the LED Frame against the wall or ceiling where you want to mount it. Use a level to ensure it is straight and aligned correctly.
4. Mark the mounting holes on the wall or ceiling using a pencil or marker. These holes will be used to secure the LED Frame.
5. If necessary, drill pilot holes at the marked positions to make it easier to insert the screws.
6. Place the LED Frame back against the wall or ceiling, aligning it with the marked holes.
7. Insert the screws through the mounting holes on the LED Frame and into the pilot holes or directly into the wall or ceiling. Use a screwdriver or drill to tighten the screws securely.
8. Once all the screws are tightened, double-check the alignment and stability of the LED Frame.
9. Connect the LED lights to a power source according to the manufacturer's instructions. Ensure that the power supply is compatible with the LED Frame.
10. Test the LED lights to ensure they are functioning properly.
11. Finally, clean the surface of the LED Frame and remove any fingerprints or smudges.
If you encounter any difficulties or have further questions, please refer to the manual provided by ALED or contact their customer support at +45 71 99 53 54 or via their website at www.aled.dk.
Add New Comment