User Manual Q&AAnswer
Jan 16, 2025 - 09:45 PM
Cleaning the Tatahance CM-ES186816NAA Portable Countertop Ice Maker Machine is an important maintenance task to ensure optimal performance and hygiene. Here is a step-by-step guide on how to clean the machine:
1. Turn off and unplug the ice maker: Before starting the cleaning process, make sure the machine is turned off and unplugged from the power source.
2. Drain any remaining water: Remove the water reservoir and drain any remaining water from it. You can do this by either pouring out the water or using the drain plug, if available.
3. Prepare a cleaning solution: Mix a solution of warm water and mild dish soap or a recommended ice maker cleaner. Follow the instructions on the cleaner's packaging for the correct dilution ratio.
4. Clean the interior: Use a soft cloth or sponge dipped in the cleaning solution to wipe the interior surfaces of the ice maker, including the water reservoir, ice basket, and ice-making mechanism. Pay special attention to any areas with visible dirt or residue.
5. Rinse thoroughly: After cleaning, rinse all the surfaces with clean water to remove any soap or cleaner residue. Ensure that no cleaning solution remains in the water reservoir or other parts.
6. Clean the exterior: Wipe the exterior of the ice maker with a damp cloth to remove any dust or stains. Avoid using abrasive cleaners or harsh chemicals that may damage the surface.
7. Dry and reassemble: Allow all the parts to air dry completely before reassembling the ice maker. Make sure that no moisture is left inside the machine to prevent mold or mildew growth.
8. Plug in and restart: Once the machine is dry, plug it back into the power source and turn it on. Allow the ice maker to run for a few cycles without collecting the ice to ensure any remaining cleaning solution is flushed out.
It is recommended to clean the Tatahance CM-ES186816NAA Portable Countertop Ice Maker Machine regularly, especially if it is used frequently. Refer to the user manual for any specific cleaning instructions or additional tips provided by the manufacturer.
Add New Comment