User Manual Q&AAnswer
Jan 16, 2025 - 09:41 PM
To properly install the ekol Inset Plus Multifuel Eco Stove, you need to follow these steps:
1. Ensure that the stove is installed in a recess that does not contain any combustible materials.
2. Connect the stove to a chimney of suitable size and type. It is recommended to use a flue liner approved for use with solid fuel.
3. Make sure the stove is installed on a level floor with adequate load-bearing capacity.
4. The stove needs to stand on a hearth of non-combustible materials that is at least 125mm thick, conforming to Building Regulations.
5. Provide access for cleaning the flue gas connector and chimney flue to ensure that the passageways for exhaust gases remain free from obstruction.
6. It is recommended to have a qualified fitter, preferably a HETAS qualified installer, install your stove.
For more detailed installation instructions and to ensure compliance with relevant regulations, please refer to the ekol Inset Plus Multifuel Eco Stove's installation and operating instructions manual.
Note: It is important to prioritize safety when installing and using the stove. If you have any doubts or concerns, it is best to consult a professional installer or contact the manufacturer for assistance.
Add New Comment