User Manual Q&AAnswer
Jan 16, 2025 - 09:18 PM
To adjust the height of the KUZCO PD50852 Ceiling LED Pendant, follow these steps:
1. Start by turning off the power completely at the fuse box to ensure safety.
2. Remove the fixture from its original package.
3. Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
4. Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
5. To change the fixture height, use an allen key to remove the set xxxx (3a) from the canopy (2a).
6. Push or pull the wire to your desired length.
7. Secure the set xxxx (3a) with the allen key in the canopy (2a) to lock the wire in place.
8. Make proper electrical connections by connecting the black wire to the hot "L" wire, the white wire to the neutral "N" wire, and the ground wire to the "GND" wire. Use the wire nuts (1b) provided in the hardware package.
9. Place the driver (4a) inside the canopy (2a).
10. Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
Please note that it is recommended to have the fixture installed by a qualified licensed electrician for safety and proper installation.
If you have any further questions or need additional assistance, you can contact KUZCO's technical support at 1-855-855-8926.
Add New Comment