User Manual Q&AAnswer
Jan 16, 2025 - 09:10 PM
To select the charge current on the SKYRC SK100055 E4 Balance LiPo Charger, follow these steps:
1. Power on the charger.
2. Locate the two toggle switches on the charger.
3. The left toggle switch is used to select the battery type (LiPo or LiFe).
4. The right toggle switch is used to select the charge current.
5. Move the right toggle switch to the desired charge current setting (1A, 2A, or 3A) according to your battery capacity.
6. Once you have selected the battery type and charge current, connect the battery and charger with the balance board.
7. The charger will start working and the LEDs will indicate the charge status and each battery cell status.
For more detailed instructions and information, please refer to the SKYRC SK100055 E4 Balance LiPo Charger manual, which can be downloaded from the provided link.
Add New Comment