User Manual Q&AAnswer
Jan 16, 2025 - 08:48 PM
To adjust the depth setting on the , follow these steps:
1. Remove the drill guide from the jig and the stop collar from the EuroHingeBit.
2. Insert the EuroHingeBit into the drill guide and place the stop collar onto the bit shank.
3. Determine the depth setting required for your specific hinge by referring to your hinge manufacturer's instructions.
4. The jig has two built-in depth-stop settings for the most common hinge cup depths. Place the drill bit shank and stop collar in the appropriate built-in depth setting.
5. Use the included hex xxxx to tighten the stop collar securely in place.
Note: It is important to follow your hinge manufacturer's instructions for determining the depth setting to ensure proper installation of the concealed hinge.
Add New Comment