User Manual Q&AAnswer
Jan 16, 2025 - 08:32 PM
To adjust the color temperature and light output of the NICOR CLR82HWRVS9WH CLR Select Commercial Recessed LED Downlight, you can follow these steps:
1. Locate the switch positions on the back of the fixture. There are two switches: the power selection switch and the CCT (Color Temperature) selection switch.
2. The power selection switch is a two-position switch that adjusts the light output. You can set it to either low or high, depending on your desired light intensity.
3. The CCT selection switch is a four-position switch that adjusts the color temperature. You can choose between 3000K, 3500K, 4000K, or 5000K, depending on your preference.
4. To adjust the switches, you may need to remove the trim of the downlight to access the back of the fixture. Follow the instructions in the manual to remove the trim and access the switches.
5. Once you have adjusted the switches to your desired settings, you can reassemble the downlight by following the installation instructions provided in the manual.
Note: It is important to turn off the power before making any adjustments or performing any installation or removal tasks. Make sure to follow all safety precautions mentioned in the manual to avoid electric shock or other hazards.
Add New Comment