User Manual Q&AAnswer
Jan 16, 2025 - 08:12 PM
To change the tool on the BOSCH GSR 12V-35 HX Cordless xxxx Driver, follow these steps:
1. Remove the battery from the power tool before carrying out any work on the tool.
2. For the GSR 12V-35 HX model, pull the locking sleeve back and pull the application tool out of the holder.
3. For the GSB 12V-35/GSR 12V-35 models, open the keyless chuck by turning it in the direction of rotation until the tool can be inserted.
4. Insert the desired tool into the tool holder or keyless chuck as far as it will go.
5. For the GSR 12V-35 HX model, release the locking sleeve to lock the application tool in place.
6. For the GSB 12V-35/GSR 12V-35 models, firmly tighten the keyless chuck by turning it by hand in the direction of rotation.
7. The tool is now securely attached to the power tool and ready for use.
Please refer to the instruction manual for detailed illustrations and further information on changing the tool on the BOSCH GSR 12V-35 HX Cordless xxxx Driver.
Source: https://manuals.plus/bosch/gsr-12v-35... xxxx -driver-manual
Add New Comment