User Manual Q&AAnswer
Jan 16, 2025 - 10:23 AM
Loading slides into the Kodak 5200 Carousel Projector is a straightforward process. Here are the steps to follow:
1. Start by obtaining a Kodak Carousel slide tray that is compatible with the Kodak 5200 Carousel Projector. The slide tray is where you will place your 35mm slides.
2. Open the slide tray by pressing the latch or release mechanism located on the side or bottom of the tray. This will allow you to access the individual slide compartments.
3. Take your 35mm slides and insert them one by one into the individual compartments of the slide tray. Ensure that the slides are facing the correct way, with the image side facing forward.
4. Once all the slides are loaded into the slide tray, close the tray by securing the latch or closing mechanism. Make sure it is securely closed to prevent the slides from falling out during operation.
5. Place the loaded slide tray onto the Kodak 5200 Carousel Projector. There is usually a designated slot or tray holder on the projector where the slide tray can be inserted.
6. Once the slide tray is properly inserted, you can turn on the projector and begin your presentation. You can manually or remotely advance the slides as needed.
For more detailed instructions and illustrations, please refer to the user manual provided for the Kodak 5200 Carousel Projector. You can access the manual by clicking on the link provided above.
Add New Comment