User Manual Q&AAnswer
Jan 16, 2025 - 10:21 AM
To connect your phone to the Bloomidea ZK-Q5 Movie Projector, you have a few options depending on your phone's capabilities and the projector's connectivity options.
1. Wireless Connection: If your phone supports wireless screen mirroring or casting, you can connect it to the projector wirelessly. Follow these steps:
a. Ensure that both your phone and the projector are connected to the same Wi-Fi network.
b. On your phone, go to the settings menu and look for the screen mirroring or casting option. This may vary depending on your phone's brand and operating system.
c. Select the Bloomidea ZK-Q5 projector from the list of available devices.
d. Once connected, your phone's screen will be mirrored on the projector.
2. Wired Connection: If your phone does not support wireless screen mirroring or if you prefer a wired connection, you can use an appropriate cable. Here are the steps:
a. Check the available connectivity options on your phone and the projector. The ZK-Q5 projector supports HDMI, USB, VGA, AV, and TF card slot.
b. Choose the cable that matches the ports on both your phone and the projector. For example, if your phone has a USB-C port, you can use a USB-C to HDMI cable.
c. Connect one end of the cable to your phone and the other end to the corresponding port on the projector.
d. On the projector, select the input source that matches the port you used for the connection (e.g., HDMI, USB).
e. Your phone's screen should now be displayed on the projector.
Note: Some phones may require additional settings or apps to enable screen mirroring or video output. Refer to your phone's user manual or online support resources for specific instructions.
Add New Comment