User Manual Q&AAnswer
Jan 16, 2025 - 06:21 AM
To set up wireless connectivity on the Epson ET-M3170 All-in-One Supertank Printer, please follow these steps:
1. Make sure that your printer is turned on and connected to a power source.
2. On your printer's control panel, navigate to the "Setup" or "Settings" menu.
3. Select the "Network Settings" option.
4. Choose the "Wireless LAN Setup" or "Wi-Fi Setup" option.
5. Select "Wi-Fi Setup Wizard" or a similar option to start the wireless setup process.
6. The printer will search for available wireless networks. Select your desired network from the list.
7. If your network is secured, you will be prompted to enter the network password. Use the printer's control panel to enter the password using the provided keypad or touchscreen.
8. After entering the password, the printer will attempt to connect to your wireless network. Once connected, a confirmation message will be displayed on the control panel.
9. To ensure that your printer is connected to the correct network, you can print a network status sheet. Refer to the user's guide for instructions on how to print this sheet.
10. Once your printer is connected to the wireless network, you can proceed to install the necessary printer drivers and software on your laptop or smartphone. This will enable you to print wirelessly from these devices.
For detailed instructions and troubleshooting tips, please refer to the User's Guide provided with the Epson ET-M3170 All-in-One Supertank Printer.
Add New Comment