How do I install and set up the Fujitsu fi-6230Z Sheetfed Scanner? (Fujitsu fi-6230Z Sheetfed Scanner Operator's Guide)

Answer

manuals.plus

Jan 16, 2025 - 06:13 AM


To install and set up the Fujitsu fi-6230Z Sheetfed Scanner, follow these steps:

1. Unpack the scanner: Remove all packaging materials and protective tapes from the scanner.

2. Connect the power cord: Plug one end of the power cord into the scanner's power connector and the other end into a power outlet.

3. Connect the USB cable: Connect one end of the USB cable to the scanner's USB port and the other end to a USB port on your computer.

4. Turn on the scanner: Press the power button on the scanner to turn it on. The scanner will go through a startup process.

5. Install the scanner driver: Insert the provided CD-ROM into your computer's CD/DVD drive. The installation program should start automatically. Follow the on-screen instructions to install the scanner driver.

6. Configure scanner settings: Once the driver is installed, you may need to configure the scanner settings. This can be done through the scanner's control panel or the scanner software on your computer. Refer to the Operator's Guide for detailed instructions on configuring settings.

7. Test the scanner: After the installation and configuration, you can test the scanner by placing a document in the scanner's input tray and initiating a scan using the scanner software on your computer.

For more detailed instructions and troubleshooting information, please refer to the Operator's Guide provided with the scanner.