User Manual Q&AAnswer
Jan 16, 2025 - 06:09 AM
To connect the Fujitsu FI-5110C Image Scanner to your computer, follow these steps:
1. Ensure that your computer meets the minimum system requirements, which include having Windows 7 installed.
2. Locate the USB cable that came with the scanner. One end of the cable should have a USB Type-B connector, while the other end should have a USB Type-A connector.
3. Connect the USB Type-B connector to the USB port on the back of the scanner.
4. Connect the USB Type-A connector to an available USB port on your computer.
5. Power on the scanner by pressing the power button located on the front panel.
6. Wait for your computer to recognize the scanner. You may see a notification or hear a sound indicating that a new device has been detected.
7. Install any necessary drivers or software for the scanner. You can refer to the Operator's Guide for instructions on how to install the drivers and software.
8. Once the drivers and software are installed, you should be able to start using the scanner with your preferred scanning application.
Note: It's important to consult the Operator's Guide for detailed instructions specific to your operating system and any additional software that may be required for proper scanner functionality.
Add New Comment