User Manual Q&AAnswer
Jan 16, 2025 - 05:58 AM
To connect the Fujitsu fi-5110EOX Color Image Scanner to your computer, please follow these steps:
1. Ensure that your computer meets the minimum system requirements, which in this case is Windows 7.
2. Locate the Ethernet port on the back of the scanner. This port is used for connecting the scanner to your computer via an Ethernet cable.
3. Connect one end of the Ethernet cable to the Ethernet port on the scanner and the other end to an available Ethernet port on your computer or network switch.
4. Power on the scanner by connecting it to a power source using the provided power cable.
5. Once the scanner is powered on and connected to your computer, wait for the scanner to initialize and establish a connection with your computer.
6. Install any necessary drivers or software for the scanner. You can refer to the Operator's Guide for detailed instructions on installing the drivers and software.
7. Once the drivers and software are installed, you should be able to access the scanner from your computer and start scanning documents.
Please note that the above steps are a general guideline, and it's always recommended to refer to the Operator's Guide for specific instructions and troubleshooting tips. The Operator's Guide provides comprehensive information on setting up and using the Fujitsu fi-5110EOX Color Image Scanner.
Add New Comment