User Manual Q&AAnswer
Jan 16, 2025 - 05:53 AM
To connect the Fujitsu SP1125N Image Scanner to your network, follow these steps:
1. Ensure that your scanner is powered on and connected to a power source.
2. Connect one end of an Ethernet cable to the Ethernet port on the back of the scanner.
3. Connect the other end of the Ethernet cable to an available Ethernet port on your network router or switch.
4. Wait for the scanner to establish a network connection. You can check the network status by referring to the scanner's display or using the scanner software on your computer.
5. Once the network connection is established, you can start scanning documents and accessing the scanner from other networked devices.
For more detailed instructions and troubleshooting tips, please refer to the Fujitsu SP1125N Image Scanner Operator's Guide provided with the product.
Add New Comment