How do I install and set up the Fujitsu fi-6110 Image Scanner? (Fujitsu fi-6110 Image Scanner Operator's Guide)

Answer

manuals.plus

Jan 16, 2025 - 05:51 AM


To install and set up the Fujitsu fi-6110 Image Scanner, please follow the steps below:

1. Ensure that your computer meets the minimum system requirements, which is Windows 7 or later.

2. Connect the scanner to your computer using the provided USB cable.

3. Power on the scanner by pressing the power button located on the front panel.

4. Install the scanner driver software by either using the installation CD included in the box or by downloading the latest driver from the Fujitsu website.

5. If using the installation CD, insert it into your computer's CD/DVD drive and follow the on-screen instructions to install the driver software. If downloading from the website, locate the fi-6110 scanner model on the Fujitsu Support page, download the appropriate driver for your operating system, and run the installer.

6. Once the driver software is installed, restart your computer to ensure the changes take effect.

7. After restarting, you can begin using the scanner with compatible scanning applications or software. The fi-6110 supports TWAIN and ISIS drivers, ensuring compatibility with various scanning applications.

For more detailed instructions and information on operating the scanner, please refer to the Operator's Guide provided with the product. You can access the Operator's Guide by clicking on the link provided above.