User Manual Q&AAnswer
Jan 16, 2025 - 05:34 AM
To install the drivers and software for the smart card reader on the Fujitsu KB SCR 100 keyboard, please follow these steps:
1. Connect the keyboard to your computer's USB port. The keyboard is plug-and-play, so you can connect it while the computer is running.
2. Once connected, the operating system will attempt to install the drivers automatically. If prompted, allow the installation to proceed.
3. If the automatic installation does not occur or if you encounter any issues, you can manually install the drivers and software. Visit the Fujitsu support website at http://www.fujitsu.com/fts/download to download the latest firmware, drivers, and tools for the keyboard.
4. On the support website, locate the section for the Fujitsu KB SCR 100 keyboard. Select the appropriate operating system version (e.g., Windows 10 64-bit) and download the driver package.
5. Once the driver package is downloaded, locate the file and double-click on it to start the installation process.
6. Follow the on-screen instructions provided by the installer. This may involve accepting license agreements, selecting installation options, and confirming the installation location.
7. After the installation is complete, restart your computer to ensure that the drivers are properly loaded.
8. Once your computer has restarted, the smart card reader on the Fujitsu KB SCR 100 keyboard should be ready for use. You can now insert a smart card into the reader and use it for secure authentication and data protection.
If you encounter any difficulties during the installation process or if you have any further questions, it is recommended to refer to the operating manual provided with the keyboard or contact Fujitsu's Hotline/Service Desk for technical support. Their contact information can be found on the Fujitsu website at http://www.fujitsu.com/fts/contact/servicedesk.
Add New Comment