User Manual Q&AAnswer
Jan 16, 2025 - 05:24 AM
To pair your Jabra Stone2 Bluetooth headset with your mobile device, please follow these steps:
1. Ensure that your Jabra Stone2 headset is fully charged and turned on.
2. On your mobile device, go to the Bluetooth settings menu.
3. Enable Bluetooth if it is not already turned on.
4. The Jabra Stone2 headset should appear in the list of available devices. Select it to begin the pairing process.
5. If prompted, enter the default PIN code "0000" or "1234" to complete the pairing. Note that some devices may not require a PIN code.
6. Once the pairing is successful, you will hear a confirmation message in the headset, and the Bluetooth icon will appear on your mobile device's screen.
7. Your Jabra Stone2 headset is now paired with your mobile device and ready to use.
If you encounter any difficulties during the pairing process, try the following troubleshooting steps:
1. Ensure that your Jabra Stone2 headset is within close proximity to your mobile device.
2. Restart both your headset and mobile device.
3. Remove any existing Bluetooth pairings on your mobile device and start the pairing process again.
4. Update the firmware/software of both your Jabra Stone2 headset and your mobile device to the latest versions.
5. Consult the Jabra Stone2 manual or visit the Jabra support website for further assistance.
Please note that the exact steps may vary slightly depending on your specific mobile device model and operating system.
Add New Comment