User Manual Q&AAnswer
Jan 16, 2025 - 05:19 AM
To install the Knightsbridge PWRCC Trimless Flush Plaster in Wall Light, follow these steps:
1. Provide power to the required point of installation.
2. Cut a 210 x 250mm hole in the mounting surface, making sure not to interfere with any joists, gas/water pipes, or electrical cables.
3. Attach the side brackets to the luminaire (refer to Fig. 1 in the manual).
4. Insert the luminaire into the cut-out, ensuring that the mains cable is pulled out of the wall, and fix the luminaire to the wall using suitable screws (not provided) (refer to Fig. 2).
5. Cover the bracket screws and the margins of the luminaire with plaster and paint (refer to Fig. 3).
6. Unscrew the terminal cover.
7. Connect the luminaire to the mains supply, ensuring the correct polarity is observed: L - Live (Brown) and N - Neutral (Blue) (refer to Fig. 4).
8. Insert a suitable GU10 lamp and clip the lamp into the luminaire.
9. Switch on and check for correct operation.
Please note that these instructions are a summary. For detailed installation steps and safety precautions, refer to the Knightsbridge PWRCC Trimless Flush Plaster in Wall Light Instruction Manual.
Add New Comment