User Manual Q&AAnswer
Jan 16, 2025 - 05:08 AM
To adjust the flow of water in the T S B-0805 Series Metering Faucets, you can follow the steps below:
1. Locate the metering cartridge adjustment on the faucet. Refer to the installation instruction manual (098-014733-45) for the specific location.
2. Use a screwdriver or a similar tool to turn the adjustment xxxx clockwise to decrease the flow or counterclockwise to increase the flow.
3. Test the water flow after making adjustments to ensure it meets your desired level.
Note: Each metering cartridge is preset for approximately 10 seconds at the factory. They may be reset at installation. If water pressure varies, the cycle time will also vary. For more detailed instructions on cartridge adjustment, refer to the installation instruction manual (098-014733-45).
If you have any further questions or need additional assistance, please refer to the T S B-0805 Series Metering Faucets Instruction Manual or contact T S Brass directly at the provided phone number, fax, or email.
Add New Comment