User Manual Q&AAnswer
Jan 16, 2025 - 05:01 AM
To assemble the LIFESOAN KIDS Splash Sand and Water Table, please follow these steps:
1. Before starting assembly, carefully read the assembly instructions provided in the manual.
2. Lay out all the parts on an open space and check that all the necessary parts are included.
3. Remove all packaging materials and dispose of them properly.
4. Assemble the product according to the instructions provided in the manual. If you have any doubts or need assistance, it is recommended to ask a technically qualified person for help.
5. Make sure to create a safe environment during assembly by keeping tools and other objects away from the workspace.
6. After assembly, check that all screws, bolts, and nuts are correctly installed and tightened. Ensure that all joints are secure.
7. The LIFESOAN KIDS Splash Sand and Water Table should be installed on a flat, horizontal surface with at least 2 meters of space between it and any structures or obstacles.
8. Do not make any alterations to the product and only use original spare parts. Improper repairs can lead to danger for the user.
9. It is recommended to visually inspect the product every 3 months to ensure its integrity. Replace any parts as necessary.
10. For additional stability and to prevent movement in hazardous weather, the product can be anchored using steel bars or pegs in the ground.
11. If you need to move the product, do so with caution to avoid bending the frame. Lift the product off the ground evenly and carry it horizontally.
12. Always use the product in a well-lit area and avoid using it under the influence of alcohol or drugs.
13. Follow all safety instructions and precautions provided in the manual to ensure secure and safe use of the product.
Please note that this is a general overview of the assembly process. For detailed instructions and specific information, refer to the LIFESOAN KIDS Splash Sand and Water Table User Guide provided with the product.
Add New Comment