User Manual Q&AAnswer
Jan 16, 2025 - 04:53 AM
To connect the ZYXEL EX3510-B1 AX5700 WiFi6 Gigabit Ethernet Gateway to your internet modem, follow these steps:
1. Use the included blue cable to connect the LAN port of your xDSL/cable/fiber modem to the WAN port of the EX3510-B1. Make sure the connections are secure.
2. Connect the power adapter to the EX3510-B1 and plug it into a power outlet.
3. Wait for approximately 2 minutes for the device to initialize. During this time, check the front panel of the EX3510-B1.
4. Once the setup is complete, the Power LEDs on the front panel will light up green.
If the lights do not turn on green, please retry the connections or contact your internet service provider for assistance.
For more detailed instructions and illustrations, please refer to the Hardware Installation section of the ZYXEL EX3510-B1 AX5700 WiFi6 Gigabit Ethernet Gateway User Guide.
Add New Comment