How do I clean the Hoshizaki IM-100CNE-28 Self-Contained Ice Machine? (IM-100CNE-28 self-contained ice machine User Guide)

Answer

manuals.plus

Jan 16, 2025 - 04:46 AM

Cleaning the Hoshizaki IM-100CNE-28 Self-Contained Ice Machine is an important maintenance task to ensure optimal performance and hygiene. Here is a step-by-step guide on how to clean the machine:

1. Turn off the power: Before starting the cleaning process, make sure to turn off the power supply to the ice machine.

2. Remove ice: Empty the ice storage bin and discard any remaining ice.

3. Clean the exterior: Use a mild detergent and a soft cloth to clean the stainless steel exterior of the machine. Avoid using abrasive cleaners or scrub brushes that may damage the surface.

4. Clean the air filters: The machine is equipped with easily accessible and cleanable air filters. Remove the filters and wash them with warm water and a mild detergent. Rinse thoroughly and allow them to dry completely before reinserting them.

5. Clean the water circuit: The Hoshizaki IM-100CNE-28 has a unique closed-cell water circuit for contamination protection. Follow these steps to clean it:
a. Drain the water: Open the drain valve and allow the water to completely drain from the machine.
b. Prepare the cleaning solution: Mix a solution of Hoshizaki Scale Away cleaner or a similar approved descaler with warm water according to the manufacturer's instructions.
c. Run the cleaning cycle: Pour the cleaning solution into the water reservoir and turn on the machine. Let it run through a complete ice-making cycle to clean the water circuit.
d. Rinse the water circuit: After the cleaning cycle, drain the cleaning solution from the machine. Refill the water reservoir with clean water and run another ice-making cycle to rinse the water circuit.
e. Repeat if necessary: If there are still signs of scale or buildup, repeat the cleaning and rinsing process until the water circuit is clean.

6. Clean the ice storage bin: Remove the ice storage bin and wash it with warm water and a mild detergent. Rinse thoroughly and allow it to dry completely before reinstalling it.

7. Restart the machine: Once the cleaning process is complete, turn on the power supply and allow the machine to start making ice again.

Please note that these instructions are a general guide, and it is always recommended to refer to the manufacturer's user guide for specific cleaning instructions and safety precautions.