User Manual Q&AAnswer
Jan 16, 2025 - 04:41 AM
To attach the J-Series Outer Fly-Ware Loudspeakers to your Danley Sound Labs loudspeaker, follow these steps:
1. Start by removing the M10 bolts on both sides of the loudspeaker using a 6 mm hex key.
2. Take one OFW bar and align it with the mounting holes on the loudspeaker.
3. Secure the OFW bar tightly to the loudspeaker by using a bolt, locking washer, and washer.
4. Repeat this process for all four positions on both sides of the loudspeaker.
5. The 3/4" hole on the OFW bar is the top rigging point and should stand off about 3 inches.
6. Once you have attached the OFW bars, you can now attach the bumper bar.
7. Align the 3/4" holes on the top of the OFW bars and use the 3/4" bolts, washers, and nuts to secure the bumper bar to the outer flyware.
Please refer to the user manual for visual illustrations and additional information on how to properly attach the J-Series Outer Fly-Ware Loudspeakers to your Danley Sound Labs loudspeaker.
Add New Comment