User Manual Q&AAnswer
Jan 16, 2025 - 04:33 AM
Cleaning the Hoshizaki IM-240NE-21 Ice Cube Maker is an important maintenance task to ensure optimal performance and hygiene. Here is a step-by-step guide on how to clean the ice maker:
1. Turn off the power to the ice maker and unplug it from the electrical outlet.
2. Remove all ice from the ice storage bin and discard it.
3. Open the front panel of the ice maker to access the interior components.
4. Remove the air filters and wash them with warm water and mild detergent. Rinse thoroughly and allow them to dry completely before reinstalling.
5. Use a soft cloth or sponge to clean the interior surfaces of the ice maker, including the evaporator plate, water distribution tube, and ice storage bin. Avoid using abrasive cleaners or materials that may damage the surfaces.
6. Mix a solution of warm water and ice machine cleaner according to the manufacturer's instructions. Apply the solution to the interior surfaces and allow it to sit for the recommended amount of time.
7. Use a soft brush or cloth to scrub the surfaces and remove any built-up residue or scale. Pay special attention to the evaporator plate, as this is where ice is formed.
8. Rinse all surfaces thoroughly with clean water to remove any remaining cleaning solution.
9. Wipe the interior surfaces dry with a clean cloth.
10. Reinstall the air filters and close the front panel of the ice maker.
11. Plug the ice maker back into the electrical outlet and turn on the power.
12. Allow the ice maker to run for a few cycles to ensure that any remaining cleaning solution is flushed out.
13. Once the ice maker is clean and running properly, it is ready to produce ice again.
For more detailed instructions and safety precautions, please refer to the Hoshizaki IM-240NE-21 Ice Cube Maker Instruction Manual.
Add New Comment