How do I assemble the FAGOR SH-11-B Stand with 12 sets of guides to hold 1/1GN trays? (FAGOR SH-11-B 12 sets 1/1GN trays Owner's Manual)

Answer

manuals.plus

Jan 16, 2025 - 04:29 AM


To assemble the FAGOR SH-11-B Stand with 12 sets of guides to hold 1/1GN trays, please follow the steps below:

1. Start by unpacking all the components and ensuring that you have all the necessary parts listed in the owner's manual.

2. Begin by attaching the legs to the base of the stand. Use the provided screws and a screwdriver to secure them firmly in place.

3. Once the legs are attached, position the stand in the desired location. Make sure it is on a level surface for stability.

4. Take the 12 sets of guides and insert them into the designated slots on the stand. These guides are designed to hold 1/1GN trays securely.

5. Adjust the guides to the desired height and spacing, depending on the size and quantity of the trays you will be using.

6. Double-check that all the guides are securely in place and properly aligned.

7. Once assembled, the FAGOR SH-11-B Stand is ready to hold your 1/1GN trays. Place the trays onto the guides, ensuring they fit snugly and are balanced.

8. If you have any further questions or need additional assistance, please refer to the owner's manual or contact the manufacturer's customer support at the provided phone number or email address.

Please note that the above instructions are a general guideline, and it is always recommended to refer to the specific owner's manual for detailed assembly instructions and safety precautions.