User Manual Q&AAnswer
Jan 16, 2025 - 04:28 AM
To assemble the accessories of the PROFI COOK PC-SMS 1220 Hand Blender Set, follow these steps:
1. Connect the gear of the whisk (9) with the whisk (8) by plugging them together. Refer to the figure on page 3 for additional guidance.
2. Press both buttons (5) simultaneously.
3. Place the motor housing (4) on the mixing rod (6) or on the pre-assembled egg whisk (8) and snap it into place. Make sure the arrow on the motor housing and the symbol on the accessory are positioned one above the other. Pay attention to the recesses on the accessory.
4. Release the buttons. The motor housing and the accessory should be firmly connected.
To disassemble the accessories, pull the accessory off the motor housing while holding down the two buttons.
Please refer to the "Assembly / Disassembly" section of the instruction manual for visual illustrations and further details.
Add New Comment