User Manual Q&AAnswer
Jan 16, 2025 - 04:27 AM
To connect the Epson LQ-2090II Dot Matrix Printer to your computer, you have two options: USB and Ethernet.
1. USB Connection:
- Ensure that your computer is powered on and the printer is turned off.
- Locate the USB port on the back of the printer.
- Connect one end of a USB cable to the USB port on the printer.
- Connect the other end of the USB cable to an available USB port on your computer.
- Turn on the printer.
- Your computer should automatically detect the printer and install the necessary drivers. If prompted, follow the on-screen instructions to complete the installation.
2. Ethernet Connection:
- Ensure that your computer and printer are both connected to the same network.
- Locate the Ethernet port on the back of the printer.
- Connect one end of an Ethernet cable to the Ethernet port on the printer.
- Connect the other end of the Ethernet cable to an available Ethernet port on your router or network switch.
- Turn on the printer.
- On your computer, open the Control Panel or System Preferences and navigate to the Printers or Devices section.
- Click on "Add Printer" or "Add Device" and follow the on-screen instructions to search for and add the printer on your network. Make sure to select the correct printer model () during the setup process.
Please note that the specific steps may vary slightly depending on your computer's operating system. For more detailed instructions and troubleshooting tips, refer to the User's Guide provided with the printer.
Add New Comment