How should I set up the Wayfair DR0518L Swing Seat? (wayfair DR0518L Swing Seat Instruction Manual)

Answer

manuals.plus

Jan 16, 2025 - 04:21 AM


To set up the Wayfair DR0518L Swing Seat, follow these steps:

1. Ensure that you have a flat and even surface to set up the swing seat. Maintain a distance of at least 2m from other structures or obstacles such as fences, garages, branches, clotheslines, or electric cables.

2. Insert the four tubes into the swing seat, making sure to match the bigger tube end with the smaller one. If the tubes are the same size, they will not connect.

3. Join two adjacent tubes together, and then join the other two adjacent tubes to create two semi-circle tubes.

4. Connect the left two joints to form a round swing seat.

5. Cover the joint with the provided Hook & Loop material, then insert the bolt into the hole at the joint.

6. Put the washer and nut onto the bolt and tighten with a wrench until 3-4 threads of the bolt are exposed. Finally, put the nut cap onto the bolt and tighten it. Ensure that all screws are tightened for safety.

The swing seat assembly is now complete.

For installation, follow these steps:

1. Wind the tree straps around the tree to the desired length. Run the D-ring through the hole at the other end of the strap, then tighten the straps.

2. Connect the tree straps and ropes with carabiners. Ensure that the  xxxx  lock of the carabiner is fully tightened.

3. Adjust the rope to the desired length and ensure the swing seat is balanced.

The swing seat installation is now complete.

Please refer to the provided manual for detailed diagrams and instructions.

Note: The Wayfair DR0518L Swing Seat is not suitable for children below 3 years of age and should always be used under adult supervision. Regularly check the swing seat, ropes, and other accessories for signs of wear and tear. Lubricate metal parts and replace any defective parts with original spares.