User Manual Q&AAnswer
Jan 16, 2025 - 04:20 AM
To install the LIGHT 67520 LED Lamp, please follow these steps:
1. Choose a suitable location: Select a location where the lamp will receive ample sunlight during the day for optimal solar charging.
2. Mount the lamp: Use the provided screws to securely mount the lamp on a wall, fence, or any other desired surface. Ensure that the lamp is positioned in a way that the solar panel is exposed to direct sunlight.
3. Night Sensor (ON/OFF): The lamp features a night sensor that automatically turns the light on at dusk and off at dawn. To activate the night sensor, press the button on the lamp briefly until the indicator flashes blue. To deactivate the night sensor, press the button again until the indicator flashes orange.
4. Manual ON/OFF: The lamp also allows for manual control. When the night sensor is deactivated, you can manually turn the lamp on or off by pressing the button briefly. The indicator will flash orange to indicate the "Manual ON/OFF" mode.
5. Dimmer switch: The lamp has a dimmer switch that allows you to adjust the light intensity from 5% to 100%. Use the dimmer switch to set the desired brightness level.
6. Charging: The lamp can be charged via solar power or USB. Solar charging time is approximately 20 hours, while USB charging time is around 6 hours. The indicator will show a red light when the lamp is charging via USB and a green light when it is fully charged.
7. Battery maintenance: The lamp is equipped with a 2x2200mAh lithium battery that has overcharge and discharge protection. Do not modify or change anything related to the solar panel or battery. Regularly clean the surface of the battery for optimal performance.
8. Working time: With a full charge, the lamp can provide up to 9 hours of continuous lighting at 100% brightness or 20 hours at 50% brightness.
Please refer to the provided manual for more detailed instructions and safety precautions.
Add New Comment