How do I install the Paulmann 708.39 Wall Lamp? (Paulmann 708.39 Wall Lamp Instruction Manual)

Answer

manuals.plus

Jan 16, 2025 - 04:17 AM

To install the Paulmann 708.39 Wall Lamp, please follow the provided installation instructions:

1. Ensure that the power supply is switched off before starting the installation.
2. Gather the necessary tools, which are not included in the package.
3. Choose a suitable location on the wall where you want to install the lamp.
4. Mark the desired position for the lamp and make sure it is level.
5. Drill holes in the wall according to the dimensions specified in the installation manual.
6. Insert wall plugs into the drilled holes.
7. Connect the wires from the power supply to the lamp's terminal block. Ensure proper wire connections (usually, black to black and white to white).
8. Securely mount the lamp onto the wall using the provided screws.
9. Once the lamp is securely mounted, restore the power supply.
10. Test the lamp to ensure it is functioning properly.

Please note that if you need to replace the light source or operating device, there are different options depending on the replaceability indicated in the product specifications:

- If the light source or operating device is replaceable by end users without permanent damage to the luminaire, you can follow the instructions provided in the manual.
- If the light source or operating device can only be replaced by a qualified electrician without permanently damaging the luminaire, it is recommended to seek professional assistance.
- If the light source or operating device is not replaceable, the entire luminaire must be replaced.

For further information or clarification, you can refer to the symbols and additional instructions available at www.paulmann.com/symbols or contact Paulmann Licht GmbH directly at their website www.paulmann.com.