User Manual Q&AAnswer
Jan 16, 2025 - 04:16 AM
To clean the HEPA-ESP filter of the BONECO F220CC/F230CC Air Shower Fan and Purifier, follow these steps:
1. Make sure the device is unplugged.
2. Tilt the fan downwards and remove the back grid.
3. Use both hands to push in the locking mechanism of the HEPA-ESP filter lightly so it can be removed from the device.
4. Clean the filter by hand using a PH-neutral detergent (10 g / 1000 ml) in 40 °C water. Wash the filter, rinse with clean water, and dry with a clean soft cloth.
5. Alternatively, you can clean the filter in a dishwasher. Do not wash the filter together with dishes or materials containing fat and grease. Only use PH-neutral cleaning detergents suitable for your dishwashing machine. Set the cleaning temperature not higher than 70 °C. Wash for one cycle and for no longer than 2 hours (including drying). After washing, check for damages or deformations to the filter. Do not reinsert a damaged filter into the device.
6. After cleaning, always check if the filter is completely dry. If necessary, leave the filter in a dry place for up to 5 hours to ensure it is completely dry before reinserting it into the fan.
7. Reinsert the filter until the locking mechanism clicks, securing the filter in the device.
8. Close the fan unit again with the back grid. Make sure the back grid is set correctly as the device will otherwise not turn on.
It is recommended to clean the filter at least once every 2 weeks with regular use. Cleaning the filter ensures optimal performance and prevents continuous clicking noise. Always unplug the fan before cleaning and do not use alcohol or corrosive cleaning agents.
Add New Comment