User Manual Q&AAnswer
Jan 16, 2025 - 04:00 AM
The installation process for the MONESSEN AVFL42NIP-BU 42 Inch Artisan Vent Free Linear Fireplace is outlined in the instruction manual provided with the product. Here is a step-by-step guide on how to install the fireplace:
1. Before starting the installation, make sure to read and understand all the safety precautions mentioned in the manual.
2. Choose a suitable location for the fireplace. Ensure that there is enough clearance around the unit as specified in the manual.
3. Install the top standoff brackets (Item 1) using the provided screws. Four brackets are required.
4. Attach the brackets (Item 2) to the sides of the fireplace using the provided screws. Two brackets are required.
5. Place the non-combustible board (Item 3) on top of the brackets to create a stable base for the fireplace.
6. Install the hood (Item 4) by attaching it to the back of the fireplace using the provided screws.
7. Attach the panel brackets (Item 6) to the sides of the fireplace using the provided screws. Two brackets are required.
8. Install the back panel (Item 7) by sliding it into the panel brackets.
9. Install the side panels (Item 8) by sliding them into the panel brackets on each side of the fireplace.
10. Install the deflection glass (Item 9) by sliding it into the designated slots on the front of the fireplace.
11. Attach the frame and screen assembly (Item 10) to the front of the fireplace using the provided screws.
12. Connect the flex line with shutoff (Item 10) to the gas supply line according to the instructions in the manual.
13. Install the valve assembly (Item 11.1) and other related components (Item 11.2 to 11.8) following the instructions provided in the manual. Make sure to use the appropriate components for your gas type (natural gas or propane).
14. Install the burner assembly (Item 11.9) according to the instructions in the manual.
15. Connect the pilot assembly (Item 11.10) and other related components (Item 11.11 to 11.13) as instructed in the manual.
16. If you wish to use a remote control, install the remote RC300-MON-VFL (Item 11.14) following the instructions provided.
17. Install the thermocouple module (Item 12) and other electrical components (Item 13 to 16) according to the instructions in the manual.
18. If you plan to use an IPI wall kit, install the components (Item 17 to 18.6) as instructed in the manual.
19. Once the installation is complete, test the fireplace to ensure it is functioning properly.
Please note that this is a general overview of the installation process. It is essential to refer to the specific instructions and diagrams provided in the MONESSEN AVFL42NIP-BU 42 Inch Artisan Vent Free Linear Fireplace instruction manual for accurate and detailed installation guidance.
Add New Comment