User Manual Q&AAnswer
Jan 16, 2025 - 03:49 AM
To install the GOODWE GW7K-HCA HCA Series AC Charger, please follow the steps outlined in the installation guide provided with the product. Here is a summary of the installation process:
1. Safety Precautions:
- Read and understand the safety precautions mentioned in the user manual.
- Ensure that the charger is installed by trained and knowledgeable technicians who are familiar with local standards and safety regulations.
- Check the deliverables for any damage or missing components before installation.
- Use insulating tools and wear personal protective equipment (PPE) for personal safety.
- Strictly follow the installation, operation, and configuration instructions provided in the guide and user manual.
2. Instructions during Installation:
- Do not dismantle the charger modules personally or extend the charging cable.
- The charger is designed to charge Electric Vehicles (EV) only, do not charge other devices.
- Wrap the charging cable around the charger after use and prevent water or debris from entering the charging connector.
- Avoid bending, squeezing, or entangling the charger and cables to prevent damage.
- Disconnect the charger and its upstream switches before installation, maintenance, or any other operations.
- Do not touch the charging connector when the charger is live.
- Regularly check the cover and appearance of the charger for any abnormalities.
- Use a clean and dry cloth to wipe the charger and its modules.
- Ensure all labels and warning marks are visible and not covered, scrawled, or damaged.
3. Check Before Power ON:
- Ensure that the charger is firmly installed in a clean, well-ventilated, and easily accessible place.
- Verify that the AC input and communication cables are connected correctly and securely.
- Check that cable ties are intact, properly routed, and evenly distributed.
- Seal any unused ports and terminals.
- Confirm that the voltage, frequency, and other grid factors are consistent with the charger's working requirements.
4. Electrical Connection:
- Use the recommended AC cable specifications mentioned in the manual.
- Follow the cable requirements for the specific charger model.
- Install the appropriate RCD (Residual Current Device) based on the charger model and specifications.
Please refer to the complete installation guide provided with the GOODWE GW7K-HCA HCA Series AC Charger for detailed instructions, diagrams, and any additional information specific to your installation requirements.
Add New Comment