User Manual Q&AAnswer
Jan 16, 2025 - 03:42 AM
To install the PHILIPS 945579847 Infuse Ceiling Light, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Before starting the installation, turn off the electrical power at the main fuse or circuit breaker box.
2. Ensure that you have the necessary tools required for installation.
3. Follow the local electrical code when installing the luminaire. If in doubt, consult a qualified electrician or contact your retail outlet.
4. Observe the correct color of the wiring before installation: white (N), black (L), and green or bare copper wire (Ground).
5. Do not connect the luminaire to a non-grounded electrical system. This could pose a risk of electric shock.
6. Use wire nuts/connectors rated for the correct gauge and number of wires used. Make sure no bare wire strands are exposed outside of the wire nuts/connections.
7. Be careful not to damage or cut the wire insulation during installation. Avoid allowing wires to contact any sharp edges.
8. Do not remove thermal insulation pad(s) as it may result in increased temperatures and a possible risk of fire.
9. Clean the interior of the luminaire with a dry cloth duster. Avoid using abrasives or solvents. Do not allow liquid on electrical parts.
10. Always consider the technical specifications of the luminaire and verify the stated icons on the identification label on the luminaire.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment