User Manual Q&AAnswer
Jan 16, 2025 - 03:40 AM
To fill the water tank of the cecotec Fast and Furious 5050 X-Treme Steam Iron, follow these steps:
1. Make sure the iron is turned off and unplugged from the mains supply.
2. Turn the steam dial to position '0' before filling the tank with water.
3. Open the cap of the tank and fill it up to the 'MAX' mark on the tank. You can see the water level through the transparent side of the tank when the iron is placed upright.
4. After use, pour out any remaining water from the tank.
Note: It is recommended to use tap water in this iron. Do not use water additives or substitute water, such as linen or scented water, as they can stain fabrics or damage the iron. Also, do not exceed the 'MAX' mark on the tank.
Add New Comment