User Manual Q&AAnswer
Jan 16, 2025 - 03:39 AM
To fill the water tank of the Tefal FV8064E0 Puregliss Iron, follow these steps:
1. Make sure the iron is unplugged and cool.
2. Locate the water tank, which is usually located at the front or side of the iron.
3. Remove the water tank by pulling it out or twisting it counterclockwise, depending on the design of your iron.
4. Fill the water tank with clean tap water. Do not use any additives or chemicals in the water.
5. Do not exceed the maximum water level indicated on the water tank. Overfilling may cause water leakage during ironing.
6. Once the water tank is filled, reinsert it into the iron and make sure it is securely in place.
7. Plug in the iron and wait for it to heat up before using.
For more detailed instructions and safety information, please refer to the "Safety and use instructions" booklet provided with the Tefal FV8064E0 Puregliss Iron.
Add New Comment