User Manual Q&AAnswer
Jan 16, 2025 - 03:30 AM
To install the Litter Robot 3 Ramp Adapter onto your Litter-Robot 4 with a step or handle, follow these steps:
1. Gather the Litter Robot 3 Ramp and the adapter bracket.
2. Take note that the bracket has three adhesive pads. It is recommended to practice installing the bracket onto the ramp before removing the red protective tape on the adhesive pads.
3. Peel off the red protective tape from the adhesive pads and install the bracket onto the ramp. If your Litter-Robot 4 has a step, proceed to Step 4. If your Litter-Robot 4 has a handle, proceed to Step 5.
4. For Litter-Robot 4 with a step: Place the ramp above the step and insert the bracket into the grate of the step. This will secure the ramp in place. Your installation is now complete. To access the waste drawer, simply lift the ramp off the step and set it aside.
5. For Litter-Robot 4 with a handle: Slide the ramp forward onto the handle. Gently push the bracket onto the handle until you hear a snap. This will secure the ramp in place. Your installation is now complete. To access the waste drawer, simply pull the ramp off the handle and set it aside.
If you have any further questions or need additional assistance, you can visit whiskersupport.com for more information.
Add New Comment