User Manual Q&AAnswer
Jan 16, 2025 - 03:14 AM
To install the FISHER PAYKEL AKRS2304 Toe Kick for Single Install RS2474, please follow the steps below:
1. Ensure that you have the necessary tools for installation, including a screwdriver and measuring tape.
2. Start by removing any existing toe kick or trim from the front of the cabinet where you plan to install the AKRS2304 Toe Kick.
3. Measure the height and width of the cabinet opening to ensure a proper fit for the toe kick. The AKRS2304 has a height of 4" and a width of 23 7/16".
4. Once you have confirmed the measurements, position the AKRS2304 Toe Kick in front of the cabinet opening. Make sure it is aligned properly and centered.
5. Use screws or other appropriate fasteners to secure the toe kick to the cabinet. The depth of the toe kick is 3/4", so ensure that the screws are long enough to securely attach it.
6. Double-check the alignment and stability of the toe kick before finishing the installation.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific user guide or installation manual provided by Fisher & Paykel for detailed instructions tailored to your specific model.
Add New Comment