User Manual Q&AAnswer
Jan 16, 2025 - 03:13 AM
To properly install the blooma Varennes Mains Powered Halogen Lamp, please follow these steps:
1. Read through the instruction manual provided thoroughly before installation and retain it for future reference.
2. Ensure that all fittings are installed by a competent person in accordance with local regulations (lET wiring regulation BS7671).
3. Check the packaging to make sure you have all the parts listed.
4. Remove all packaging, wrap, etc. from the product.
5. Decide on the appropriate location for your product, ensuring it is not located in a corrosive environment.
6. Refer to the installation drawing for the orientation of the product.
7. Securely fix the product to the mounting surface using the screws and wall plugs supplied. Note that these fixings are suitable for "masonry" only, and other fixings must be purchased separately if needed.
8. Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.
9. Ensure that the fixing point(s) selected are capable of supporting the full weight of the light fitting.
10. Refer to the wiring diagram for reference, but always refer to the terminal marking for wiring.
11. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
12. Never put anything on the product or hang anything on any part of it, and never use the terminal cables to bear the product weight.
13. If the product does not light after installation, ensure there is no electricity failure and that all connections are secured.
14. If you have any doubts about the installation or use of this product, consult a qualified electrician.
15. Always disconnect the product from mains at least 10 minutes allowing it to cool down before any maintenance or adjustment.
16. It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.
Please note that this answer is based on the information provided in the user guide for the blooma Varennes Mains Powered Halogen Lamp. For any specific installation concerns or further assistance, it is recommended to refer to the user guide or consult a qualified electrician.
Add New Comment