How do I install the BURG WACHTER BWR-50 AI Security Radar? (BURG WACHTER BWR-50 AI Security Radar User Guide)

Answer

manuals.plus

Jan 16, 2025 - 03:12 AM


To install the BURG WACHTER BWR-50 AI Security Radar, follow these steps:

1. Choose the desired location for installation. Ensure that the ground within the detection area is hard, such as concrete ground. If the ground is covered by vegetation, make sure the vegetation height is below 20 cm.

2. Make sure there are no vegetation, buildings, or vehicles within the monitoring area that could obstruct the radar's operation. Also, ensure there is no electromagnetic interference, such as air conditioner exterior units or transformers, near the installation location.

3. Transport, use, and store the radar within the permitted temperature range and humidity level. Avoid placing the radar in humid, dusty, extremely hot or cold, and intense electromagnetic radiation places.

4. When transporting the radar, pack it with the packaging provided by the manufacturer or packaging of the same quality. Avoid pressing hard, violently vibrating, or soaking the radar during transportation, storage, and installation.

5. Connect the camera to power or PoE (Power over Ethernet).

6. Install the IP-Finder software and open the device's web interface. During the first setup process, you will need to define a personal password.

For more detailed instructions and explanations of the various functions, please refer to the complete user manual, which can be downloaded as a PDF file from the manufacturer's website.