User Manual Q&AAnswer
Jan 16, 2025 - 03:11 AM
To operate the Naeve 243473 Pendant Light, please follow these steps:
1. Fan Speed: The pendant light has a built-in fan with three speed options. The RPM (Revolutions Per Minute) for each speed setting is as follows: 980, 750, and 600 ±12% - 5. The fan is equipped with five wings inside.
2. Ideal Room Size: The pendant light is suitable for rooms with a size of approximately 10m3/min and a height of 2.5m.
3. Remote Control: The pendant light comes with a remote control for convenient operation. Please refer to the remote control instructions provided with the product for details on how to use it.
4. Safety Instructions: It is important to note the following safety instructions:
- Electrical connections should only be carried out by expert staff.
- The manufacturer does not accept responsibility for injuries or defects caused by improper use of the luminaire.
- The pendant light is designed for indoor use only.
5. Attention: Before performing any work on the lamp, make sure to disconnect it from the mains power line by removing the fuse or unplugging the power plug. This applies to cleaning, maintenance, and installation work. If the lamp has a transformer, it should only be operated with the original transformer.
6. Child Safety: Lamps are not toys, and children may not recognize the dangers associated with electric appliances. Keep the lamp away from children, and always include the provided instructions if giving the lamp to someone else.
7. Lamp Damage: If the lamp or its cord/socket is damaged, discontinue use immediately. In case of malfunction, always have the lamp repaired by a qualified electrician. Do not attempt to repair the lamp yourself, as improper repairs can compromise user safety.
8. Protection Class: The pendant light is classified as Protection Class II, which means it is particularly isolated and should not be connected to a protective earth terminal. During installation, ensure that electric lines are not damaged.
9. Eye Safety: Avoid looking directly into the LED diodes of the light to prevent the risk of eye injury. The LED's in the luminaire cannot be replaced.
10. Mains Voltage: Do not exceed the given mains voltage specified for the pendant light.
11. Plug and Connection Elements: Ensure that the plug and connection elements are free from strain and excessive force.
For any further inquiries or specific details, please refer to the Naeve 243473 Pendant Light Instruction Manual provided with the product.
Add New Comment