User Manual Q&AAnswer
Jan 16, 2025 - 03:07 AM
To adjust the temperature on the GROHE DN 15 CC150 Shower Mixer, follow these steps:
1. Locate the temperature adjustment handle on the shower mixer.
2. Turn on the water supply and wait for the water to reach the desired temperature.
3. Rotate the temperature adjustment handle clockwise to increase the temperature or counterclockwise to decrease it.
4. Test the water temperature by turning on the shower and adjusting the handle until you reach the desired temperature.
5. If you want to set a maximum temperature limit, insert the accompanying temperature limiter in the temperature selection handle. This will prevent the water from exceeding a certain temperature, ensuring safety.
Please note that the thermostat mixers are factory-adjusted at a flow pressure of 3 bar on both sides. If you experience temperature deviations due to special installation conditions, you may need to adapt the thermostat to local conditions. Refer to the manual for detailed instructions on adjusting the thermostat.
It is important to follow the safety notes provided in the manual, such as installing thermostatic devices to limit the water temperature in sensitive areas and observing applicable standards and regulations for drinking water. Regular maintenance, cleaning, and lubrication of the shower mixer are also recommended for optimal performance.
Add New Comment