How do I install the Dorset Electric Fireplace Insert in a wall? (bio fireplace group ELP-80-124 Electric Fireplace User Guide)

Answer

manuals.plus

Jan 16, 2025 - 01:45 AM


To install the Dorset Electric Fireplace Insert in a wall, please follow the steps outlined in the user guide provided with the product. Here is a general installation guide:

1. Ensure that you have all the necessary tools and equipment for installation, including a screwdriver, drill, level, and measuring tape.

2. Choose a suitable location on the wall for the fireplace insert. Make sure there is enough space and clearance around the unit as specified in the user guide.

3. Mark the desired location on the wall and use a level to ensure it is straight.

4. If necessary, cut a hole in the wall according to the dimensions specified in the user guide. Be cautious of any electrical wiring or plumbing behind the wall.

5. Place the fireplace insert into the hole and secure it to the wall using screws or brackets provided. Make sure it is level and securely attached.

6. Connect the fireplace insert to a power source. Ensure that the power supply meets the electrical requirements specified in the user guide.

7. Test the fireplace to ensure it is functioning properly. Follow the instructions in the user guide to operate the fireplace and adjust the settings as desired.

Please note that these are general installation guidelines. For detailed and specific instructions, it is recommended to refer to the user guide provided with the Dorset Electric Fireplace Insert.