User Manual Q&AAnswer
Jan 16, 2025 - 01:41 AM
To connect the security radar and cameras to AXIS Radar Auto tracking for PTZ, follow these steps:
1. In the Windows taskbar, right-click AXIS Radar Auto tracking for PTZ and select Open AXIS Radar Auto tracking for PTZ.
2. Select Create group and enter a name for the group.
3. Select Add security radar and enter the IP address of the security radar. If connecting via HTTPS, select Options and choose HTTPS.
4. If the security radar has not been configured yet, click on Status: Not configured and follow the instructions in the application to configure it.
5. Select Add camera and enter the IP address of the camera. If connecting via HTTPS, select Options and choose HTTPS.
6. Configure the camera by clicking on Status: Not configured and following the instructions in the application.
7. Repeat steps 3-6 for each security radar and camera you want to connect.
8. Once connected, the security radar will provide motion data to direct the PTZ cameras to where there is movement.
Note: It is important to ensure that the security radar and cameras are properly configured and calibrated for accurate tracking. For more information on calibration and other settings, refer to the AXIS Radar Auto tracking for PTZ User Manual.
Add New Comment