User Manual Q&AAnswer
Jan 16, 2025 - 01:31 AM
To reverse the door on your INSIGNIA NS-BC48SS3 48 Can Beverage Cooler, follow these steps:
1. Remove the top cap on the upper hinge (right side) by gently pulling it off.
2. Use a screwdriver to remove the three screws that hold the upper hinge to the top of the cabinet.
3. Carefully remove the top hinge and lift the door up off the bottom hinge. Place the door on a padded surface to prevent scratching.
4. Remove the three button plugs from the upper left corner of the cabinet and transfer them to the holes on the opposite side. Press them firmly into place.
5. Remove the three screws that hold the bottom hinge to the lower part of the cabinet and remove the foot on the other side.
6. Reinstall the bottom hinge on the left corner of the cabinet and reinstall the foot on the other side.
7. Transfer the door stop bracket and bushing from the bottom edge of the door to the holes on the opposite side.
8. Place the bottom left corner of the door onto the lower hinge and install the top hinge onto the cabinet. Ensure that the door is level and seals correctly against the cabinet, then securely fasten the three screws.
9. Snap the top cap back onto the hinge.
Please refer to the user guide for visual illustrations and additional information on reversing the door.
Add New Comment