User Manual Q&AAnswer
Jan 16, 2025 - 01:13 AM
To pair the KASTA H1CSB Hesperus Touch Remote Switch with other KASTA devices, follow these steps:
1. Ensure that the electricity is disconnected before installation to prevent any accidents.
2. Install the remote switch by a licensed electrician in accordance with the requirements of AS/NZS 3000 and other relevant Standards and Regulations.
3. Once the remote switch is installed, download the free KASTA app from www.kasta.com.au or your app store.
4. Open the KASTA app on your compatible iOS or Android device.
5. Make sure your device supports Bluetooth 4.0.
6. Follow the instructions in the KASTA app to create an account and set up your KASTA system.
7. In the app, go to the device pairing section and select the option to add a new device.
8. Put the KASTA H1CSB Hesperus Touch Remote Switch into pairing mode by pressing and holding any button on the switch for a few seconds until the LED indicator starts flashing.
9. The app will search for available devices. Once the remote switch is detected, select it to initiate the pairing process.
10. Follow the on-screen instructions in the app to complete the pairing process.
11. Once paired, you can configure smart functions such as timers, scenes, and groups for the remote switch using the KASTA app.
Please note that it is important to refer to the KASTA app and the specific device's user manual for detailed instructions on configuring and using the smart functions of the remote switch
Add New Comment