How do I set up and use the Melowave SPP-F40 40 Watt Folding Solar Panel? (MELOWAVE SPP-F40 40W Folding Solar Panel User Manuals)

Answer

manuals.plus

Jan 16, 2025 - 01:00 AM

Setting up and using the Melowave SPP-F40 40 Watt Folding Solar Panel is quick and easy. Here are the steps:

1. Setup:
- Unfold the panel and place it on a firm, solid surface.
- Aim the panel towards the sun.
- The panel can be laid flat and aimed straight up or positioned at a 45-degree angle by unfolding the foldable legs attached to the back of the panel at each end.

2. Operation:
- Locate the Smart Junction Box on the back of the Solar Panel (or underneath if the panel is laying flat on its backside). This is the electrical hub for connecting to the panel.
- When the Solar Panel is active, the green power light on the Smart Junction Box will light up, indicating that the panel is operational.
- Choose an available port on the Smart Junction Box to connect your device and supply power to it.
- The Smart Junction Box offers multiple connection options:
- Two USB-A ports
- One USB-C port
- One 5525 DC power port
- A cable with a 20 amp rated XT60 Male plug is hardwired to the panel for powering or charging devices that use it.

3. Product Specifications:
- The Melowave SPP-F40 40 Watt Folding Solar Panel has a maximum output of 40 Watts and up to 20V output.
- It can be set up angled or flat.
- The Smart Junction Box has multiple charging outputs, including USB-A, USB-C, and 5525 DC barrel type charging ports.
- It also features an LED power level meter and the ability to charge multiple devices simultaneously.
- The panel is water-resistant (panel only) and has a built-in zippered compartment for the junction box and cables.
- It is foldable for easy transport and storage.

For more detailed instructions and safety information, please refer to the Melowave SPP-F40 40 Watt Folding Solar Panel User Manual provided with the product.