User Manual Q&AAnswer
Jan 16, 2025 - 12:57 AM
To install the oneLIGHT 65660BTT Dark Light Tube Track Spot, please follow these steps:
1. Before starting the installation, ensure that the selector xxxx A is in the OFF position and the adaptor lock B is disengaged.
2. Make sure the track adaptor is correctly oriented before mounting it into the track system.
3. Rotate the adaptor lock B clockwise 90° to connect the adaptor to the neutral circuit.
4. To select the desired circuit, rotate the selector xxxx A to the corresponding position:
- Circuit 1: Rotate xxxx A 90° clockwise from the OFF position to connect circuit 1.
- Circuit 2: Rotate xxxx A 90° anti-clockwise from the OFF position to connect circuit 2.
- Circuit 3: Rotate xxxx A 180° clockwise from the OFF position to connect circuit 3.
Please note the following warnings:
- Ensure that the product is properly installed before connecting it to electricity.
- Do not cover the fitting to prevent overheating.
- Maintenance and installation should only be carried out by a professional electrician.
For further information or clarification, you can refer to the instruction manual provided with the product or visit the manufacturer's website at www.1-light.eu.
Add New Comment