User Manual Q&AAnswer
Jan 16, 2025 - 12:37 AM
To assemble the anko 43224661 Modular Touch LED Light, please follow these steps:
1. Connect the USB buckle at the "top" side of the modular light, ensuring that it is facing the same direction.
2. Connect the USB buckle to the other light modular.
3. Use the fixing buckle to secure the desired lamp shape.
4. Connect the USB cable to a USB adapter (not included) with an output voltage of DC 5V 2A.
5. Remove the insulation tape on the remote control and press the "on" button against the light.
If the light does not turn on, please check if the connector board is properly connected.
Note: The other unoccupied USB port on the light can be used to power up additional devices.
Please refer to the provided instruction manual for visual illustrations and further details on assembling and using the anko 43224661 Modular Touch LED Light.
Add New Comment